Bambu Lab H3C 3D Printer – Advanced Multi-Material Printing
The Bambu Lab H3C 3D Printer combines advanced multi-material printing, intelligent automation, and high-speed precision in one integrated system. Featuring SwapTek™ technology, nine independent PrintTools, FlexFeed extrusion, and the integrated AMS 3H filament management system, the H3C is designed to handle complex printing projects with greater efficiency and flexibility.
Key Features of the Bambu Lab H3C
- 9-Material Printing: Nine independent filament paths with minimal purge per swap.*
- 6-Second Material Switching: Tools stay docked, loaded, and preheated.
- Ultra-Soft TPU Printing: Up to 3× the flow rate on flexible filament.*
- Fully Enclosed Filament System: Integrated storage and automated filament feeding.
- Automated Multi-Process Tool Switching: Print, cut, draw, and deboss with optional tools.*
- Large Build Volume: 330 × 320 × 325 mm of usable printing space.
- Active Chamber Heating and Cooling: Designed to support engineering-grade materials.
- Built-In Filament Drying: On-demand drying for moisture-sensitive materials.
SwapTek™ – 6-Second Print-to-Print Material Switching
The Bambu Lab H3C features nine PrintTools, each with its own dedicated filament path and heater. Every material stays loaded, preheated, and ready to print, eliminating the need to retract one filament before loading another.
With an optimized design, fine-tuned parameters, and Active Pre-Heat technology, switching between PrintTools takes as little as 6 seconds. This helps reduce waiting time and makes multi-material printing more efficient.
Active Pre-Heat Technology
Preheat the Next Nozzle Before You Need It
Heating a nozzle usually requires waiting. Active Pre-Heat anticipates the next tool change and warms the incoming nozzle while the current tool is still printing. This allows the new material to start printing within as little as 6 seconds.
FlexFeed Extruder – High-Speed Soft TPU Printing
Print Soft TPU Up to 3× Faster
Printing soft TPU can be challenging because flexible filament may buckle before reaching the nozzle, limiting extrusion speed. The Bambu Lab H3C addresses this challenge with its FlexFeed extruder system.
FlexFeed supports both 1.75 mm and 2.85 mm filament. Its dedicated 2.85 mm TPU configuration provides greater resistance to buckling and supports higher volumetric flow. This enables reliable printing with TPU as soft as 75A at up to 3× the flow rate of traditional printers.
FlexFeed switches seamlessly between 1.75 mm and 2.85 mm filaments. A cam-driven mechanism powered by a PMSM motor maintains precise and consistent filament tension for reliable extrusion.
Mixed Nozzle Sizes
Speed Where You Want It. Detail Where It Matters.
Different parts of a model often require different levels of detail and printing speed. The Bambu Lab H3C supports multiple nozzle sizes at once, allowing each PrintTool to handle the task it is best suited for.
For example, a dial may require a 0.2 mm nozzle for fine details, while a case can use a 0.4 mm nozzle and a flexible TPU band can use a dedicated 0.4 mm TPU nozzle. Combined with Bambu Studio's mixed-diameter toolpath planning algorithm, each nozzle can print at a suitable layer height without being restricted to one shared layer height.
Retractable Rack
A Clear View of the Printing Process
Watching a 3D print take shape is part of the printing experience. The Bambu Lab H3C features a retractable rack that moves out of view, providing a clearer look inside the chamber. This design makes it easier to observe the first layer and monitor the printing process.
More Than 3D Printing – Optional Multi-Process Tools
Print. Cut. Draw. Deboss. All in One Machine.
SwapTek™ is not limited to PrintTools. Optional CutTool, DrawTool, DebossTool, and other compatible tools can be mounted using the same system and switched automatically.
This makes it possible to combine multiple processes in one project without requiring separate machines, manual tool changes, or repeated setups.
AMS 3H – Integrated Filament Management System
The Bambu Lab H3C includes the AMS 3H, an integrated filament management system designed specifically for the SwapTek™ tool-changing system. It keeps filament rolls enclosed against moisture and automatically feeds materials into the PrintTools.
Its built-in two-slot dryer provides additional care for moisture-sensitive filaments such as PA, PET, and TPU.
Automatic Filament Loading
Simple and Automated Filament Management
Loading filament does not have to involve manual feeding and complicated setup. Simply place a filament spool into any of the nine available slots. The AMS 3H automatically detects, routes, and engages the filament with the PrintTool across all nine paths.
Built-In Filament Dryer
Dry Filament While You Print
Moisture can affect filament performance and print quality. The integrated drying system helps manage moisture-sensitive materials while keeping filament storage and feeding within the printer.
Auxiliary AMS – Expand Up to 24 Filament Spools
Nine Materials, With Room for More
The Bambu Lab H3C can connect to existing Bambu Lab AMS units through PrintTool No. 1, supporting up to 24 filament spools. This provides access to more colors and materials in a single print without changing your regular workflow.
Integrated Filament Storage Design
Filament Storage Built Into the Printer
The Bambu Lab H3C integrates filament storage and drying into its compact design. Instead of using external spool racks and exposed filament paths, the system keeps filament management within the printer, helping maintain an organized workspace.
Bambu Lab H3C – Flagship Printing Performance
Behind the Bambu Lab H3C's multi-material capabilities is a motion and thermal management system designed for precision and performance. Cross-flow cooling helps produce cleaner overhangs, while the heated chamber supports engineering-grade materials. Its advanced motion system maintains detailed printing performance even at high speeds.
Advanced Motion System
Lighter Toolhead. Faster Printing. High Precision.
The toolhead and X-axis assembly are 40% lighter*, reducing inertia for faster and more precise movement. With acceleration reaching 25,000 mm/s² and travel speeds up to 1,400 mm/s, the Bambu Lab H3C is designed to deliver high-speed performance while minimizing vibrations and ringing that can affect print quality.
Optional Vision Encoder
50 μm Motion Accuracy
For applications where precision matters, the optional Vision Encoder helps maintain accuracy over time. By providing an absolute optical reference, it enables recalibration to compensate for mechanical wear and drift, restoring motion accuracy to under 50 μm across the build volume.
Cross-Flow Cooling System
Consistent Cooling for Cleaner Prints
Effective cooling is essential for consistent 3D printing quality. The Bambu Lab H3C features four layers of cooling that work together to support reliable printing.
- A CFD-optimized part cooling fan.
- Dual auxiliary fans for improved overhangs and bridges.
- A dedicated PrintTool fan for thermal stability during extended printing and tool changes.
- A chamber fan that draws in cooler air to help regulate internal temperatures.*
350°C Nozzles and Active Chamber Heating
Engineered for High-Temperature Materials
Engineering-grade filaments require precise temperature control. The Bambu Lab H3C features active dual-zone chamber heating up to 65°C, helping maintain consistent chamber temperatures and minimize warping.
All nine hardened-steel nozzles can reach temperatures up to 350°C, supporting demanding materials such as ABS, PC, PA-CF, PET-CF, and more.
Intelligent Automation and AI Monitoring
The Bambu Lab H3C combines advanced printing technology with automated calibration and intelligent monitoring. These features help simplify routine operations, identify potential issues, and reduce the need for manual adjustments.
Full-Auto Calibration
Nine Tools, Automatically Calibrated
With nine PrintTools working together, accurate calibration is essential. The Bambu Lab H3C automatically manages PrintTool docking calibration, offset compensation for accurate color and material alignment, and bed leveling before every print.
AI-Powered Print Monitoring
Intelligent Monitoring From Start to Finish
The Bambu Lab H3C uses a range of vision systems* to monitor the printing process. Before printing begins, the system checks the chamber against the slicer setup and can flag mismatches. During printing, its AI monitoring features help detect issues such as spaghetti failures, purge-bin jams, and clogs.
All-New HMS With MiniWiki
Find Solutions Directly on the Printer Screen
The updated HMS goes beyond displaying error codes. It helps diagnose the actual cause of an issue by narrowing down possible problems, ranking their likelihood, and explaining what each one means.
MiniWiki provides step-by-step troubleshooting guidance directly on the printer's screen, helping users understand and resolve common issues without switching between the machine and an external help page.
Official Bambu Lab H3C Accessories
Bambu Lab's official accessories are designed to complement the H3C and help create a more organized and convenient 3D printing workspace.
Bambu Station L
Lift It Up. Keep Your Workspace Organized.
Bambu Station L raises the Bambu Lab H3C to a comfortable working height, making filament loading, maintenance, and monitoring easier. Its dedicated storage space underneath provides convenient access to tools, spare filament, and other essentials.
Air Purification and Filtration Accessories
Help Maintain a Cleaner Workspace
Compatible air purification accessories are designed to help capture unwanted particles and odors. The result is a more comfortable workspace while you work on your 3D printing projects.


Technical Specifications
Printer Specifications
| Printing Technology | |
|---|---|
| Type | Fused Filament Fabrication |
| Body | |
| Build Volume (L * W * H) | 330*320*325 mm³ |
| Enclosure Type | Enclosed |
| Hotend Switching System | Bambu Lab SwapTek™ 9-Tool Switching |
| Chassis | Steel |
| Outer Frame | Plastic |
| Dimensions and Weight | |
| Package Dimensions | 600*630*700 mm |
| Product Dimensions | 493*571*587 mm |
| Recommended Installation Space | 593*1056*1306 mm |
| Net Weight | 36.28 kg (including the AMS 3H) |
| Toolhead | |
| Extruder Gear | Hardened Steel |
| Included Nozzle Material | Hardened Steel |
| Max Nozzle Temperature | 350 °C |
| Included Nozzle Diameter | 0.4 mm |
| Supported Nozzle Diameter | 0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm |
| Filament Cutter | Built into the PrintTool |
| Expansion Options | Supports the CraftTool (CutTool, DrawTool, and more coming) |
| Supported Filament Diameter | 1.75 mm, 2.85 mm (Bypass feed only) |
| Extruder Motor | Bambu Lab high-precision brushless servo motor with planetary gearbox |
| Heatbed | |
| Build Plate Material | Flexible Steel Plate |
| Included Build Plate Type | Textured PEI Plate |
| Supported Build Plate Type | Textured PEI Plate, Cool Plate SuperTack, Engineering Plate |
| Max Heatbed Temperature | 120 °C |
| Speed | |
| Max Speed of Toolhead | 1,400 mm/s |
| Max Acceleration of Toolhead | 25,000 mm/s² |
| Max Flow for Hotend | 40 mm³/s |
| Chamber Temperature Control | |
| Active Chamber Heating | Supported |
| Max Temperature | 65 °C |
| Air Purification | |
| HEPA Filter Grade | H11 |
| Activated Carbon Filter Type | Granulated Coconut Shell |
| VOC Filtration | Excellent |
| Particulate Matter Filtration | Supported |
| Cooling | |
| Part Cooling Fan | Closed Loop Control |
| Hotend Cooling Fan | Closed Loop Control |
| Main Control Board Fan | Closed Loop Control |
| Chamber Heat Circulation Fan | Closed Loop Control |
| Auxiliary Part Cooling Fan | Closed Loop Control |
| Exhaust Fan | Closed Loop Control |
| Filaments Supported | |
| Standard Filaments | PLA, PETG, PCTG, TPU, EVA, PE, PP, PHA |
| Support Filaments | PVA, BVOH, support filament |
| Reinforced Filaments (Standard) | Carbon/glass fiber reinforced: PLA, PETG |
| Engineering Filaments | ABS, ASA, HIPS, PA, PAHT, PC, PET, PPA, PPS; Carbon/glass fiber reinforced equivalents |
| Filament Drying | Supported |
| Sensor | |
| Live View Camera | Built-in; 1920*1080 |
| Toolhead Camera | Built-in; 1920*1080 |
| BirdsEye Camera | Optional; 3264*2448 |
| Door Sensor | Supported |
| Filament Run Out Sensor | Supported |
| Nozzle Clumping Sensor | Supported |
| Filament Odometry | Supported |
| Power Loss Recovery | Supported |
| Electrical Requirements | |
| Voltage | 100-120 VAC, 50/60 Hz |
| Max Power | 1850 W @ 110 V |
| Standby Power | Wi-Fi disconnected: 11.7–12.2 W; Wi-Fi connected: 12.2–12.7 W |
| Operating Temperature | 10 °C - 30 °C |
| Electronics & Software | |
| Touchscreen | 5-inch 854*480 touchscreen |
| Storage | Built-in 64 GB EMMC and USB port |
| Control Interfaces | Touchscreen, mobile App, PC App |
| Slicer | Bambu Studio; Supports third-party slicers (Super Slicer, PrusaSlicer, Cura) |
| Wireless Network | Wi-Fi 6 |
AMS 3H Specifications
| Body & Capacity | |
|---|---|
| Package Dimensions | 550*615*500 mm |
| Product Dimensions | 480*562*460 mm |
| Net Weight | 9 kg |
| Spool Capacity | 9 |
| Housing | PC/ABS |
| Printing & Compatibility | |
| Feeding Funnel Filaments | PLA, PETG, PCTG, TPU for AMS, EVA, PE, PP, PHA, PVA, BVOH, ABS, ASA, HIPS, PC, PA, PET, PPS + Carbon/Glass Fiber variants |
| Bypass Feed Filaments | TPU |
| Supported Spool Dimension | Width: 50 mm - 68 mm; Diameter: 197 mm - 202 mm |
| RFID Identification | Supported |
| Drying | |
| Max Drying Temperature | 85 °C |
| Drying Capacity | 2 |
| Active Moisture Discharge | Supported |
| Sealed Storage | Supported |
| Temperature/Humidity Detection | Supported (Display on screen, Bambu Studio, and Bambu Handy) |
| Power | |
| Voltage | 100-120 VAC, 50/60 Hz |
| Max Power | 200 W @ 110 V |
| Steady-State Power | 70 W @ 110 V |

