Bambu Lab P2S 3D Printer

With the P2S, Bambu Lab is now taking the success of the legendary P series to a whole new level with a powerful second-generation 3D printer that combines innovation, user-friendliness and premium technology in a compact device.

The Bambu Lab P2S has been developed from scratch and equipped with state-of-the-art technology, including the DynaSense extruder and the Active Airflow System, inspired by the high-end H2D series. With automatic flow dynamic calibration, the P2S ensures flawless print quality, even without manual tuning. The 5-inch touch display with the new, intuitive second-generation user interface and full HD live camera makes every interaction fluid, modern and precise!

The Icon, Redefined

Get the Highlights

The User Experience As Good As A Smartphone.

The P2S features a fully upgraded touchscreen and a powerful processor, running our new intuitive second-generation UI. Enjoy smoother interactions, richer graphics, and clearer step-by-step instructions.

5-inch Touch Screen ｜ 2nd-Gen UI

70% More Extrusion Force & Real-Time Error Detection.

The PMSM servo extruder delivers up to 8.5 kg of maximum extrusion force—70% more than its predecessor—dramatically improves high-flowrate extrusion stability. Our proprietary servo architecture samples resistance and position at 20 kHz, actively detecting filament grinding and clogs in real time.

PMSM Servo Architecture ｜ DynaSense Extruder

Print Smooth At Every Corner, Always.

The P2S uses a high-resolution, high-frequency eddy current sensor to calibrate flow dynamics. Intelligent algorithms actively adjust the flow rate based on these readings, provide precise, consistent extrusion across every layer and corner.

Active Flowrate Compensation ｜ Eddy Current Pressure Sensor

Perfect Overhang No Matter the Filament or Temperature.

Unlike traditional cooling systems that recirculate hot air, the P2S’s Adaptive Airflow System draws in cool air directly from outside the chamber. This significantly improves cooling efficiency, letting you confidently print low-temperature filaments with the door closed—without worrying about overhang quality or nozzle clogs.

Cold-Air Intake ｜ Cooling Mode

50°C Chamber Ready For Engineering-Grade Filaments.

The P2S features a flap-controlled Adaptive Airflow System that efficiently seals heat within the chamber while actively filtering the internal air through a high-performance carbon filter. This allows you to confidently print demanding engineering filaments prone to warping, all while maintaining clean, safe air quality in your workspace.

Heat Preservation ｜ Carbon Filter

Peace Of Mind, Everytime You Print.

The P2S introduces advanced AI computer vision that actively detects common printing issues such as spaghetti, nozzle blobbing. It also checks your print start settings, ensuring a safe and accurate start to every print job.

AI Error Detection ｜ 2 TOPS NPU

---

Bambu Lab P2S 3D Printer Specifications

Item		Specification
Printing Technology		Fused Deposition Modeling
Body	Build Volume (W*D*H)	256*256*256 mm³
	Chassis	Plastic and Steel
	Outer Frame	Plastic and Glass
Physical Dimensions	Physical Dimensions	392*406*478 mm³ Package Size: 490*490*560 mm³
	Weight	P2S Net Weight: 15.0kg Gross weight: 18.58kg P2S Combo (AMS 2 Pro included) Net Weight: 16.4kg Gross weight: 21.33kg
Toolhead	Extruder Gear	Hardened Steel
	Nozzle	Hardened Steel
	Max Nozzle Temperature	300 °C
	Included Nozzle Diameter	0.4 mm
	Supported Nozzle Diameter	0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm
	Filament Cutter	Built-in
	Filament Diameter	1.75 mm
	Extruder Motor	Bambu Lab High-precision Permanent Magnet Synchronous Motor
Heatbed	Build Plate Material	Flexible Steel Plate
	Included Build Plate Type	Textured PEI Plate
	Supported Build Plate Type	Textured PEI plate, Smooth PEI Plate, Cool Plate SuperTack
	Max Heatbed Temperature	110 ℃
Speed	Max Speed of Toolhead	600 mm/s
	Max Acceleration of Toolhead	20,000 mm/s²
	Max Flow for Hotend	40 mm³/s (Test parameters: 250 mm round model with a single outer wall; Bambu Lab ABS; 280 ℃ printing temperature)
Filtration	Activated Carbon Filter Type	Granulated Coconut Shell
	VOC Filtration	Supported
	Particulate Matter Filtration	Supported
Cooling	Part Cooling Fan	Closed Loop Control
	Cooling Fan for Hotend	Closed Loop Control
	Auxiliary Part Cooling Fan	Closed Loop Control
Filament Supported	PLA, PETG, ABS, ASA, TPU, Support for PLA, Support for PLA/PETG, Support for ABS, PET, PA, PC, PVA, PLA-CF, PETG-CF, ABS-GF, ASA-CF, PA6-CF, PA6-GF, PAHT-CF, PPA-CF, PET-CF
Sensor	Camera	Built-in; 1920*1080; 30 fps HD
	Door Sensor	Supported
	Filament Run Out Sensor	Supported
	Filament Tangle Sensor	Supported
	Filament Odometry	Supported with AMS
	Power Loss Recovery	Supported
Electrical Requirements	Voltage	100-120 VAC / 200-240 VAC, 50/60 Hz
	Max Power*	1200 W@220 V / 1000 W@110 V
	PLA Steady-State Power	200 W@220 V / 200 W@110 V（PLA printing）
Working Temperature		10 °C–30 °C
Electronics	Touchscreen	5-inch 854*480 Touchscreen
	Storage	Built-in 8 GB EMMC and USB Port
	Control Interface	Touchscreen, mobile App, PC App
	Motion Controller	Dual-core Cortex-M4 and Single-core Cortex-M7
	Application Processor	Quad-core 1.5 GHz ARM A7
	Neural Processing Unit	2 TOPS
Software	Slicer	Bambu Studio Supports third-party slicers which export standard G-code, such as Super Slicer, PrusaSlicer and Cura, but certain advanced features may not be supported.
	Supported Operating System	MacOS, Windows, Linux
Network Control	Ethernet	Not Available
	Wireless Network	Dual-Band Wi-Fi
	Network Kill Switch	Not Available
	Removable Network Module	Not Available
	802.1X Network Access Control	Not Available
Wi-Fi	Operating Frequency	2412 - 2472 MHz, 5150 - 5850 MHz (FCC/CE) 2400 - 2483.5 MHz, 5150 - 5850 MHz (SRRC)
	Wi-Fi Transmitter Power (EIRP)	2.4 GHz: <23 dBm (FCC); <20 dBm (CE/SRRC/MIC) 5 GHz Band1/2: <23 dBm (FCC/CE/SRRC/MIC) 5 GHz Band3: <30 dBm (CE); <24 dBm (FCC) 5 GHz Band4: <23 dBm (FCC/SRRC); <14 dBm (CE)
	Wi-Fi Protocol	IEEE 802.11 a/b/g/n

* To ensure the heatbed quickly reaches the needed temperature (35-110℃), the printer will maintain maximum power for about 3-5 minutes.

Download TDS

---

What's in the box

Bambu Lab P2S

AMS 2 Pro (combo version)

Filament Buffer (combo version)

Buildplate

Accessory Box

Spool Holder