Save Money on IPA/Alcohol

With its water-washable property, you can easily clean most of the resin residue with water and only finish the last 10% of cleaning with alcohol.

Top-Reviewed 3D Printing Water Washable Resin

As a beginner-friendly resin, it immediately became the crowd’s favorite. Prints come out great, and cleaning is easy.

High Compatibility

Compatible with most LCD and DLP 3D printers, it’s versatile and suitable for various 3D printing applications.

How to Post-Process Water-Washable Resin

As straightforward as it is, there are always some tips and tricks that will help you navigate your water-washable journey. Learn how to post-process your prints properly, how to handle the wastewater, and more!

1. Remove From Building Plate

2. Wash With Water

*Don't dump wastewater directly into the drain.

3. Dry and Cure

4. Completed

Cleaning

1. Remove models from the building plate.

2. Wash models in a Washing Station filled with water or 95% ethanol for 45–60 seconds. When washing with water, we recommend a final quick rinse with ethanol for cleaner results.

3. After cleaning, leave it to air dry for at least 30 minutes or use a compressed air gun.

*When printing flat on the building plate, remove the printed objects carefully to avoid deformation on the objects.
*If models are hollowed, make sure the inner parts are thoroughly cleaned.
*Do not soak models in solvent for more than 60 seconds to avoid surface damage.

Post-Curing

1. Post-cure the models in post-curing stations like Elegoo Mercury, Anycubic Wash & Cure or Phrozen Cure or Phrozen Cure Mega S to post-cure the models for the best results.

Check Out These Amazing Models

Specification

• Weight: 1KG per bottle
• XY Resolution: 50 µm
• Recommended Layer Height: 30-100 µm
• Way to Rinse: Clean with water & spray with air gun. DO NOT dump waster water directly. Cure the waster water by sunlight OR add 10% Waste Disposal Agent and filter residues before dumping.

• Key Performance:
  • Viscosity: 149 cps
  • Proportion: 1.05
  • Tg：87 °C
  • Elongation: 14 %
  • Break value: 21 MPa
  • Surface hardness: Shore 80D
  • I-Zod Impact：1.52 KJ/m2
  Precautions
  • Use and preserve resins in room temperature, dark, and ventilated condition.
  • Shake well before use.
  • After printing, keep used resins in a closed & opaque bottle. Avoid mixing used resin with a fresh one.
  • Keep resin away from kids and away from direct sun-light exposure.
  • Wear gloves and masks during operation of resins. Wash with plenty of water if you get direct skin contact or eye contact with resins.
  • DO NOT dump resin. Please cured it and treat it as general plastic garbage